CPU

80C186XL12

Display

320×240 lattice LCD

Controllable axes:

3axes(X. Y .Z.)

Linkage axes

Freewill 2 axes of X,Y ,Z axes

Min setting unit

X axis: 0.001mm
Y axis: 0.001mm
Z axis: 0.001mm

Min move unit

X axis : 0.001mm
Y axis: 0.001mm
Z axis : 0.001mm

Max travel

± 9999.999mm

Software travel limit

±9999.999mm

Max move speed
( 0.001mm unit)

X axis : 7.6m /min
Y axis: 7.6m /min
Z axis: 7.6m /min

Max move speed
( 0.002mm unit)

X axis : 15.2m /min
Y axis : 15.2m /min
Z axis : 15.2m /min

Feed speed

1～7600mm /min

Fast speed ratio

F0 , 25% ,50% , 100% 4 grades actual adjustable

Feed ratio

0 - 150%, 16 grades actual adjustable

Fast speed shift mode

Linear

Feed shift mode

Exponent

Interpolation

Linear/ full-cycle arc

Electronic gear ratio

1～127/1～127

User program edit

Storage: 40KB/63programs, ISO code, full-screen edit

G function

24 kinds G codes, incl. 12 kinds fixed/complex cycle, 8 kinds macro dictate, read/write16 points input/6 points output

Subprogram, macro program

Three-double subprogram transfer, macro program transfer with M, S, T code (optional)

User data storage

Program, parameter, tool compensation and coordinate-holding at power-lost (non-losable RAM);Program, parameters, tool compensation backup storage(Flash-EEPROM)

Communication

RS232 interface for transferring user program, parameters, tool compensation data between this system and PC (optional)

Spindle function

2 or 4 grades spindle shift, hand/program control, optional: 0～10V simulate output, spindle inverter control. Actually adjustable 50%～ 120% spindle ratio, constant linear cutting speed

Tool function

Tool length compensation, 32 grades compensation setup
Tool radius compensation B, 32 grades compensation setup

Assistant function

All positive/reverse rotation, brake and stop of spindle, coolant, lubrication controlled by hand or program, collet controlled by program

Hand function

16 grades adjustable continuous hand feed; 0.001/0.01/0.1/ 1mm , 4 grades adjustable single step feed; 0.001/0.01/ 0.1mm , 3 grades adjustable feed handwheel (optional)

Operation mode

Edit, automation, input, hand (JOG), handwheel/singlestep, return mechanical origin, return program origin

Others function

Machine lock, assistant function lock, dry run, single segment run, program lock, parameter lock, extend multiple switch (optional), extend emergency button/feed hold/ circle start switch (optional)